HYUNDAI TUCSON 2.0 2010 Disel Manual switch sensor - image

Files (1)

hyundai_tucson_manual_shift_sensor.stl

STL

87.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
hyundai_tucson_manual_shift_sensor.stl	Primary model	87.0 KB STL	Slice file	Slice file	Slice file	Ensure proper fitment before printing by checking the dimensions against the original part

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

HYUNDAI TUCSON 2.0 2010 Disel Manual switch sensor

0 downloads56 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

HYUNDAI TUCSON 2.0 2010 Disel 4-speed automatic with Shiftronic,Manual switch sensor. Damaged plastic parts of the sensor Repair and replace 3D objects. Setup/Test method 1.Remove the shifter knob one minute before referring to this video https://www.youtube.com/watch?v=v6PnjR6XsOM&t=569s 2.This 3D object snaps into the connecting rod, knob move to D position, turn 90 degrees, move to the middle position of manual, C notch faces the switch sensor, put the bottom end, the top of the 3D object is locked with zip ties. 3.Test if the picks moved to the sensor have "Di Da” switch sound. 4.Turn on the car key to drive but do not start, move the knob whether the manual speed 1 appears on the dashboard.