2014 Toyota Highlander Cupholder - image

Files (4)

Toyota_Cup_Holder_-_Back.stl

STL

158.7 KB

Toyota_Cup_Holder_-_Bracket.stl

STL

2.2 KB

Toyota_Cup_Holder_-_Front.stl

STL

158.3 KB

Toyota_Cup_Holder_-_v2.stl

STL

139.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
Toyota_Cup_Holder_-_Back.stl	Mount / bracket	158.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports
Toyota_Cup_Holder_-_Bracket.stl	Mount / bracket	2.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Toyota_Cup_Holder_-_Front.stl	Mount / bracket	158.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports
Toyota_Cup_Holder_-_v2.stl	Mount / bracket	139.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

2014 Toyota Highlander Cupholder

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is for the center console for the 2014 Toyota Highlander 2nd Row Seating with Captains Chair. The cup holder was poorly designed and the bottom spring loaded portion that actually holds the cup in place to prevent the cup from falling all the way through broke so I designed this to keep cups and bottles in the holder. Its nothing fancy or good looking but simply works. My 3D printer does not print sizes larger than 6 inches which is why the front cup holder looks funny. I've also created one with a simple ring around it to keep it steady and from falling through the hole. I had to superglue the U-shape brackets onto the top portion but with it combined its a tight fit through the cup holder anyway. I also created this with no support which is why its in 2 separate parts, please feel free to remix this if you have a better idea. Infill: 50% Support: none.