Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2015 Honda Accord Gas Cap Tether
Shared by
3DPrintedCarPartDescription
This is a replacement for the OEM 2015 Honda Accord gas cap tether (because who wants to spend $75 for a replacement gas cap??). I tried to keep the original ring around the cap and make and in-place replacement part. You can remove the ring from the cap with needle nose pliers. The original tether has a tab and a pin holding it to the cap (see photos). You can remove the tether from the car, itself, also (with a little bit of effort) also using the needle nose pliers. The ring doesn't spin all that well since the tether obstructs it a bit, but maybe try to grease or WD-40 to help it move and possibly shave down the strap a bit. Note that this is a work in-progress, so I have iterated it a few times. The pictures have a different end than the final version, but the install is the same procedure. Supports are needed only for the little cylindrical tab.
Compatible Cars
Originally published on thingiverse.com by Mason Nixon (masonnixon) · License: All Rights Reserved
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
