Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Honda_key_v9.stl | Primary model | 985.8 KB STL | 28g $0.66 | 30g $0.72 | 66g $1.58 | Pause print at 60-70% completion to insert the key |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Honda Early 90s key remplacement case
Shared by
3DPrintedCarPartDescription
Remixed from https://www.thingiverse.com/thing:855488 with the scale ratio from https://www.thingiverse.com/thing:3855766 I made it to fit an old Mk4 Honda Accord (1989-1993). Like the originals 3D models, you have to pause your 3D printing at 60%-70% completion and insert your key at this moment. At 100% size with my PLA printer, inserting my key were hard but possible, consider a 102% to 105% scale ratio to fit your key if you print in ABS. I've replaced the source design which copy the Honda OEM key by the H Logo, it's much cleaner than the OEM look since most of 3D printer cannot handle nicely a such level of detail.
Compatible Cars
Originally published on thingiverse.com by Vincent Originel (VincentOriginel) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
