2015 Spark 4x6 Rear Speaker Adaptor to 5x7 - image

Files (5)

4x6_adapter-1-02-5-25-18.STL

STL

271.5 KB

4x6_adapter-1-5-25-18.STL

STL

275.6 KB

4x6_adapter-2-02-5-25-18.STL

STL

232.0 KB

4x6_adapter-2-5-25-18.STL

STL

234.2 KB

4x6_adapter_full.STL

STL

509.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
4x6_adapter-1-02-5-25-18.STL	Printable file	271.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
4x6_adapter-1-5-25-18.STL	Printable file	275.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
4x6_adapter-2-02-5-25-18.STL	Printable file	232.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
4x6_adapter-2-5-25-18.STL	Printable file	234.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
4x6_adapter_full.STL	Printable file	509.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

2015 Spark 4x6 Rear Speaker Adaptor to 5x7

0 downloads50 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

To adapt your rear speakers from the 4x6 small ones and put a larger 5x7 in their place. Mirror for opposite side. Designed for Phoenix Gold SX57CX speakers (Great Speakers, worth the $$). May want to reduce flange cut depth from 3mm to 1.5mm, Size is 200mm x 146mm x 31.75mm. Will fit on 165mm X 145mm bed if you use the split in half version and use 4x 1/8 diameter pins and epoxy parts together. Original solid works file included for customization. Probably best to pick a black or gray material.