2016-??? Subaru Outback Cup Holder Insert - image

Files (1)

chold2.stl

STL

8.7 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
chold2.stl	Primary model	8.7 MB STL	Slice file	Slice file	Slice file	Use a 0.40mm nozzle for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

2016-??? Subaru Outback Cup Holder Insert

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I really disliked the cup holders in my 2016 Outback as my coffee cup always clanked around during my commutes so the first thing I did when I got a 3D printer was come up with and insert for the cup holder. I designed this around my nozzle, 0.40mm with (2) perimeters and (4) solid bottom layers. Printing it like that makes it somewhat flexible when printing with PETG. In any event it should print fairly fast using minimal material and will work quite well. I made the ID to accommodate my Starbucks travel cup, 71.5mm ID and beveled the upper lip so the cup will slide into the holder without fuss... edit: for some reason the first stl I uploaded was corrupt a corrected version is now uploaded.