2018 Subaru Backup Cam Cover 2.0 - image

Files (1)

copy_of_subaru_backup_cam_cover.stl

STL

38.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
copy_of_subaru_backup_cam_cover.stl	Cover / cap	38.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

2018 Subaru Backup Cam Cover 2.0

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Back Up Camera "Roof"/Shield Test vehicle: 2018 Subaru Outback Designed to keep the weather from dripping on the camera. I tested visability using my print out of the 1.0 version and saw a lot of the view was blocked, I'm hoping this redesign opens up the view. Will print and test, but feel free to try yourselves. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lq3ljd4jL1V