2018 Subaru Backup Cam Cover 5.0 - image

Files (1)

surprising_migelo-blad.stl

STL

43.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
surprising_migelo-blad.stl	Primary model	43.5 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

2018 Subaru Backup Cam Cover 5.0

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Backup Camera Roof 5.0 Test Vehicle: 2018 Subaru Outback Total redesign on the backup camera roof. I widened the "awning" to minimize the tunnel vision/visual blocking of the camera. I also raised it a bit around the lip. It'll stick out a little more, but hopefully it'll still be effective. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/2OInCUoGIeF