Files (1)

RAV4_tray_handle.STL

STL

11.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
RAV4_tray_handle.STL	Primary model	11.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

2019 RAV4 Console Tray Handle

0 downloads51 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The aftermarket console tray is difficult to grasp since it fits so well and has only slightly angled separators. This adds a 1" wide tab that can be grasped and lift the tray out. It requires drilling a hole through the tray for a screw to attach it with. I used the cut function of the slicer to print a little of the bottom in order to drill through it while holding it in place. The rubber matting will need to be trimmed slightly with scissors.