Files (1)

aux_+_usb_singola.stl

STL

16.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
aux_+_usb_singola.stl	Primary model	16.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

USB + AUX panel for Toyota

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

in my rav4 I decided to mount a 2din stereo but the usb port and the aux jack are in the back part, so I decided to design a plate to insert in a predisposition. the measurements are: 24.5mm x 42.5mm x 17mm.