2019 Toyota Highlander Viofo clip - image

Files (1)

Highlander_2019_RearDash_Clip.stl

STL

28.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Highlander_2019_RearDash_Clip.stl	Clip	28.9 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for improved adhesion if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

2019 Toyota Highlander Viofo clip

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this clip for the rearview dash cam that comes with the VIOFO A129 PRO Dual Channel Ultra 4K. This will allow you to clip it to the rear trim and be able to open and close the rear window. I used Carbon Fiber PETG at 40% seems pretty solid and gives a nice clean look. I used a rubber tape between the clip and the car's plastic trim so it doesn't leave a mark. This is what I used: https://www.aliexpress.com/item/32996639498.html?spm=a2g0s.9042311.0.0.27424c4dkTFBat