Toyota Highlander Fuse cover extension - image

Files (2)

FuseExtension.stl

STL

313.3 KB

FuseExtensionTHICK.stl

STL

677.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
FuseExtension.stl	Printable file	313.3 KB STL	Slice file	Slice file	Slice file	Print in a heat-resistant material due to the interior automotive environment.
FuseExtensionTHICK.stl	Printable file	677.4 KB STL	Slice file	Slice file	Slice file	Print in a heat-resistant material due to the interior automotive environment.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Toyota Highlander Fuse cover extension

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Remixed to be just the walls to extend the original cover. Clip this on, then clip on the original cover. Has holes for add-a-fuse wires that may need to come out. recommend you print in PETG or other heat resistant material. 0.2 layer height infill doesnt really matter it's solid walls WITH supports pink is PROTOTYPE filament. I use colors that I don't use much otherwise to prototype. Final should be white or grey.