2020 (and probably 2019) Ford Ranger ignition trim bezel - image

Files (1)

2020_Ford_Ranger_Ignition_Bezel.stl

STL

1.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2020_Ford_Ranger_Ignition_Bezel.stl	Primary model	1.1 MB STL	Slice file	Slice file	Slice file	Ensure a snug fit by calibrating your printer accurately

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

2020 (and probably 2019) Ford Ranger ignition trim bezel

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I was disheartened to learn that the brand new truck I bought had no trim bezel around the ignition. A quick internet search makes me think the XL and XLT trim Rangers do not come with a trim bezel from the factory... on purpose.... This design is simple, and a very snug fit, so depending on the accuracy and calibration of your printer, you may have trouble installing. I'm including the Fusion360 file so you can modify it to fit your needs. Feel free to remix and play with it to make it better.