2021 Mazda BT50 / D-Max Cup Holder Inserts preview

Files (1)

BT50 Cup Holder Round.stl

STL

50.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 10%	100% solid	Recommendation
BT50 Cup Holder Round.stl	Mount / bracket	50.9 KB STL	Slice file	Slice file	Slice file	Use a heated bed for printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

2021 Mazda BT50 / D-Max Cup Holder Inserts

0 downloads11 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

supports unlikely

Infill

5% infill with at least 1mm thick walls

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

2021 Mazda BT50 / D-Max Cup Holder Inserts Description: If you're the owner of a 2021 Isuzu D-Max or Mazda BT50 and tired of the excessively deep cup holders, these inserts are what you're looking for. Print out these inserts and drop them in your cup holders to decrease the depth by 45mm. This should avoid coffee cups and other various liquid holding devices from getting stuck! Print Settings: Printer: One with a heated bed at least Layer Height: 0.2+… make it course. No one will see the sides! Infill: 5% or so, but make the walls at least 1mm thick. Supports: No Filament Material: If you live in Australia, not PLA. PETG/ABS/ASA recommended. Notes: This was originally made in March 2022, but hoping others can get some use out of it now. Confirmed to be compatible with the 2021 Mazda BT50 and 2021 Isuzu D-Max. This may fit the Isuzu MU-X, and other year models, but I can't guarantee. License: This model is licensed under [license type]. Please refer to the licensing terms for details on what you're allowed to do with this model. Changelog: Version 1.0: Initial upload.