Ford_Maverick_Plate3.stl

STL

4.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ford_Maverick_Plate3.stl	Primary model	4.0 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

2022 Ford Maverick Cubby Launch Plate

0 downloads40 views0 likes

Shared by

Verified

Description

First time messing with 3D software, Just reworked on AceGoliath's Eject Button https://www.thingiverse.com/thing:5204357 I wanted an actual key to hold the tag so it wouldn't fall out as i opened the switch, so i made it into a Launch switch instead. I also raised the switch a bit for more room so it wouldn't be hard to lift it, and reinforced the back since my PLA warped on the first print. might help with warping with prolonged heat exposure in the Maverick. I used AA batteries instead since i have a lot of rechargeable ones laying around, and so i can use the rest of the holders for other projects. Button: https://smile.amazon.com/dp/B07DFNC7MH?psc=1 Switch: https://smile.amazon.com/dp/B07VNDPZ9W?psc=1 Battery Holder: https://smile.amazon.com/dp/B07WY3VMNN?psc=1 Launch Key Tag: https://smile.amazon.com/dp/B0852R4GH9?psc=1 Key and Lock: https://smile.amazon.com/dp/B07HFFRKSH?psc=1