2DIN car audio frame for Kia/Hyundai 188x100 - image

Files (1)

Cerato2din_frame.stl

STL

183.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Cerato2din_frame.stl	Primary model	183.2 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

2DIN car audio frame for Kia/Hyundai 188x100

0 downloads189 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Standard 2DIN head unit size is 178x100, while Kia/Hyundai in some cars has the rectangular window for the unit of size 188x100. This frame was designed for Chinese Android-based head units, which have a 177mm x 100mm front panel and a 181.5mm x 104mm plastic "brim" (see photos). I have designed it to fit my Kia Cerato, but it should be good for other Kia and Hyundai cars with the same head unit window size. I recommend to use PETG for this print: it is both flexible and strong enough. Do not use PLA for car and outdoors prints, since it can be deformed on a heat. The brackets on the photo, which are used to mount the head unit to the car, are in another thing