Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| FuseBoxCover.stl | Cover / cap | 213.3 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
| FuseBoxCoverSolid.stl | Cover / cap | 92.1 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
| FuseBoxCoverWithoutOBDHolder.stl | Cover / cap | 175.5 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Hyundai Kona fusebox cover (OBD-friendly)
Shared by
3DPrintedCarPartDescription
The fusebox cover in the Hyundai Kona can not be used with an OBD reader plugged into the port due to there not being any room left for it due to the design of the original fusebox cover. This fusebox cover gives room to plug in a low profile OBD reader or a low profile OBD splitter/extension cable. One version has a holder and window for holding a "Vgate ICar2 ELM327 bluetooth OBD2" reader.
Compatible Cars
Originally published on thingiverse.com by Henrik Larsson (laselase) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
