Files (1)

trappe_fuse.stl

STL

268.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

18g

Based on 25% main infill across listed model files

Material cost

$0.44

Filament only at roughly $24/kg PETG / ASA

Print time

31m–52m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
trappe_fuse.stl	Primary model	268.5 KB STL	17g $0.40	18g $0.44	40g $0.96	Check the final orientation and support settings in your slicer before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

trappe fuse Hyundai KONA

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Hyundai Kona fuse box cover. Catalog note: trappe fuse Hyundai KONA is a 3D-printable car-part listing indexed for classified fitment Hyundai Kona. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.