Sun_Visor_v1_with_support.stl

STL

1.9 MB

Sun_Visor_v2_with_support.stl

STL

2.1 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

42g

Based on 25% main infill for the largest likely-needed model file

Material cost

$1.01

Filament only at roughly $24/kg PETG / ASA

Print time

1.2h–2.0h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Sun_Visor_v1_with_support.stl	Printable file	1.9 MB STL	37g $0.89	40g $0.97	88g $2.12	Ensure proper adhesion to the print bed to avoid warping.
Sun_Visor_v2_with_support.stl	Printable file	2.1 MB STL	39g $0.93	42g $1.01	92g $2.22	Ensure proper adhesion to the print bed to avoid warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hyundai Getz Sun Visor clip

0 downloads40 views0 likes

Shared by

Verified

Description

Replacement part for Hyundai Getz sun visor clip. Re-designed the small clip that broke with a sturdier design.

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Willie Marneweck (WSM25) · License: CC BY-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.