Files (1)
Based on 40% main infill across listed model files
Filament only at roughly $24/kg NinjaFlex TPU
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | NinjaFlex TPU 20% | NinjaFlex TPU 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Water_Bottle_Adapter.stl | Primary model | 1.5 MB STL | 37g $0.89 | 50g $1.20 | 88g $2.12 | Print with standard TPU printing settings |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Cup Holder Adapter for H2 Hydrology 22 oz Water Bottle in 2015 Hyundai Sonata
Shared by
Michael ChenDescription
This is a cup holder adapter for an H2 Hydrology 22 oz water bottle in a 2015 Hyundai Sonata. The water bottle fits loosely inside the cup holder and can fall out while driving. This design stabilizes the water bottle by filling the gap which keeps it from falling out. Water bottle: https://www.amazon.com/gp/product/B07T34HDTP This must be printed using a flexible filament like NinjaFlex TPU since the adapter has a snug fit against the water bottle (slight inference). The adapter may need to be raised or lowered on the water bottle to get the proper fit inside the cup holder: raise to loosen fit, lower for tighter fit. Step (.stp) and Fusion 360 (.f3d) files are included to make it easier to modify. Set slicer settings to print solid with all perimeters. Follow standard TPU printing settings.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
