2nd Gen Tacoma Regular Cab Snugtop window fan - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

2nd Gen Tacoma Regular Cab Snugtop window fan

0 downloads36 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a design for window mounting 120mm fans from the interior window frame screws in a Snugtop camper shell. Increased ventilation while out and about. One file is for the top 2 screw of the frame, the next for the bottom 2 screws, and then air guides. The air guide aren't featured in the pictures mounted, however, they do mount to the fan drawing in air on the inside of the shell. Fan used is a OD1238-12HSS. Mounting screws were replaced with slightly longer ones.

Compatible Cars

Toyota Tacoma

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by WD R (castmem) · License: CC BY-NC-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.