2nd Gen Toyota Tacoma Cupholder Insert - image

Files (2)

Cupholder_Base.STL

STL

1.1 MB

Cupholder_Wing_symmetrical.STL

STL

956.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cupholder_Base.STL	Mount / bracket	1.1 MB STL	Slice file	Slice file	Slice file	Use 4 solid top and bottom layers as recommended by the creator for added strength
Cupholder_Wing_symmetrical.STL	Mount / bracket	956.1 KB STL	Slice file	Slice file	Slice file	Use 4 solid top and bottom layers as recommended by the creator for added strength

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

2nd Gen Toyota Tacoma Cupholder Insert

0 downloads58 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I created this based on the idea found I believe from the 4Runner's and adopted it to work with my 2nd Gen Tacoma (2009.) I built using PLA at 0.2mm layer height and it looks great. I would recommend 4 solid top & bottom layers & 2-3 outlines. Been using for 2.5 years now and it's still going strong. You will need to print: 1x body 2x Wings (Symmetrical) Purchase Separately: 2x 1.5" long counter-sunk 10-24 screws (will thread directly into plastic when printed) 2 springs to fit length & desired resistance (I believe I bought 3"x1/4" springs) This is my first Thing so let me know what y'all think.