Files (1)

Seat_Belt_Retainer.stl

STL

1.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 45%	100% solid	Recommendation
Seat_Belt_Retainer.stl	Primary model	1.0 MB STL	Slice file	Slice file	Slice file	Minor fitting may be required over the existing metal pin

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

3000GT Seat Belt Holder

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The seat belt stay for the driver seat on my 3000GT was broken when I bought it, and so I reverse engineered the existing passenger one. This may require minor fitting over your existing metal pin to press it on, but it does work well and reflects the styles of the car. Recommended printing in ABS and painted with UV-resistant paint to suit. 4 walls thick with a 45% infill.