Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| soporte_alfombra_l200.stl | Primary model | 347.0 KB STL | Slice file | Slice file | Slice file | Ensure a small cut is made in the genuine floor carpet to access the factory hole. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Floor Matt holder for Mitsubishi l200 triton montero pajero
Shared by
3DPrintedCarPartDescription
i made this thing to hold the floor matts. in my case the l200 came with holders only on the driver side, so y copied they to fit the same way on the passenger side. You need to make a small cut on the genuine floor carpet to access the factory hole that "holds the holder" Attached also the original PTC creo.prt files let me know if another Mitsubishi uses the same holder.
Compatible Cars
Originally published on thingiverse.com by Gustavo Anuch (Tavoxer) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
