3D Garmin 55 Dashcam Holder for Chevrolt Volt - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

3D Garmin 55 Dashcam Holder for Chevrolt Volt

0 downloads32 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is simple dashcam holder, which clamps around the rear-view mirror on a Chevrolet Volt (tested on a Gen1 2015 model) and is compatible with the ball-and-socket joint of a Garmin 55 dashcam. The clamp has to be printed with a flexible material (here: Orange TPU), the holder can be printed with pretty much anything, perhaps ABS or PETG for improved heat resistance - cars can get hot. A few 8x2mm magnets (ideally: 8) snap both the clamp and the holder together. Make sure the magnets are oriented correctly when assembling.