3rd Gen Tacoma left hand pocket to shelf conversion - image

Files (1)

2017_tacoma_LH_pocket_converter_for_trialer_brake_controller_Tekonsha_90160_Primus_IQ.stl

STL

58.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2017_tacoma_LH_pocket_converter_for_trialer_brake_controller_Tekonsha_90160_Primus_IQ.stl	Primary model	58.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

3rd Gen Tacoma left hand pocket to shelf conversion

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this replacement part to convert the side dash pocket to a shelf to mount a brake controller. This was designed for the Tekonsha 90160 Primus IQ Electronic Brake Control.