4th gen Legacy Outback extending center console support - image

Files (1)

Cenrter_console_support.STL

STL

20.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cenrter_console_support.STL	Primary model	20.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

4th gen Legacy Outback extending center console support

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I had this awful rattle from my extending arm rest once I put coilovers on it. I found that once put in the lower position the arm rest just hovered there. I made this piece to bridge the gap and eliminate the vibration. I went a head and epoxied it in place so there is not risk of it falling out.