Full Width Console Tray for Subaru Outback 4th Gen - image

Files (1)

outback_console_tray_shallow.stl

STL

408.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
outback_console_tray_shallow.stl	Primary model	408.5 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Full Width Console Tray for Subaru Outback 4th Gen

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Console tray for 4th Generation (2010-2017) Subaru Outback. I modeled the original part, but without the blank for the ejector switch (or whatever the higher trim level comes with). Original tray was sized to fit 2009 cell phones and mine was always sliding out on turns. The new one is wider and has an adjustable depth. I printed a deep one for me, uploaded a shallow one here. Contact me if you want something else. Thingiverse appears to be mangling the pics so here's the full album: https://imgur.com/a/uFnBTBM