552856 - Button - Hand Brake - SERIES IIA & III - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

552856 - Button - Hand Brake - SERIES IIA & III

0 downloads29 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

After searching for this part for My Land Rover series III 1976, and found that was really hard to get and to expensive, i've decided to design it and print it. Really happy with the final result,used yellow ABS just because my car is yellow. the inner hole is smaller than necessary, so i used a m5 screw tap for the final adjustment. Fits perfectly. When i have the time to install it into the car i will add an extra photo of the assembled part.