5th Gen Honda Prelude Exterior Door Handles - image

Files (3)

prelude_handle_2.stl

STL

9.3 MB

prelude_handle_2.stp

STP

427.8 KB

prelude_handle_pass.stl

STL

9.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
prelude_handle_2.stl	Printable file	9.3 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation
prelude_handle_2.stp	Printable file	427.8 KB STP	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation
prelude_handle_pass.stl	Printable file	9.3 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

5th Gen Honda Prelude Exterior Door Handles

1 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Drop in replacement for a 1997-2001 (5th gen) Honda Prelude exterior door handles: Driver's side: prelude_handle_2.stl Passenger's side: prelude_handle_pass.stl The passenger's side is just a mirror of the main file, I have not directly verified that that fit perfectly so consider trying a draft print in FDM first to ensure fitment. May require 4mm hinge pin replacement: https://www.mcmaster.com/8920K16-8920K161/ And retaining rings for the new pin: https://www.mcmaster.com/92133A105/ The door latch rod insert is also available here: https://www.thingiverse.com/thing:5910053 The printed version show is a low quality FDM print for fitment purposes; the actual final model has somewhat better proportions/curvature than is shown here. Fitment it intended to be tight to account for various printing processes, so some sanding and other post-processing (like painting) may be required.