Honda CRV Interior Door Handle Rod Guide - image

Files (3)

CRV1.stl

STL

89.9 KB

CRV2.stl

STL

135.6 KB

CRV3.stl

STL

29.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CRV1.stl	Printable file	89.9 KB STL	Slice file	Slice file	Slice file	Verify orientation and supports in slicer
CRV2.stl	Printable file	135.6 KB STL	Slice file	Slice file	Slice file	Verify orientation and supports in slicer
CRV3.stl	Printable file	29.8 KB STL	Slice file	Slice file	Slice file	Verify orientation and supports in slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Honda CRV Interior Door Handle Rod Guide

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This part is for replacement of the interior door handle rod guide. Identified in the pictures by the orange arrow. Reinforced compared to the original. Easy to print, without supports. Three M3 hexagon head bolts and nuts are required. Pay attention to the bolts length. The bolts must remain flat with the end of the nut. Grind them if needed. I forgot to take a picture after installation, but it works.