5th Generation Honda CR-V Head Unit Visor - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

5th Generation Honda CR-V Head Unit Visor

0 downloads54 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

The Honda CR-V head units seem to be sensitive to temperature and sun light and will go haywire. This is a small visor that slides over the top of the 5th gen (2017-2020) Honda CR-V head unit to shade it from direct sunlight. Included are two sets of files: Visor and visor holder in one piece each Visor left/right and visor holder left/right Once printed, you should be able to glue the parts together as you can see in the pictures. I used hot glue although super glue should work as well.