Files (4)

XM_Back.stl

STL

221.7 KB

XM_Base.stl

STL

66.3 KB

XM_Front.stl

STL

455.2 KB

XM_Mount_v4.step

STEP

379.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
XM_Back.stl	Printable file	221.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
XM_Base.stl	Printable file	66.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
XM_Front.stl	Printable file	455.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
XM_Mount_v4.step	Mount / bracket	379.2 KB STEP	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Car XM Mount - Honda CRV

0 downloads50 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Car (2006 Honda CRV) had a dummy mount for XM, and the factory antenna is not made any more. This fits a Sirius XM SV300 antenna, and bolts directly to the holes in the roof of the car. Uses M4 bolts and screws into the plastic.