8mm Spark Plug Wire Separator Holder - image

Files (1)

8mm_Spark_Plug_Wire_Separator_Holder.STL

STL

37.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 63%	100% solid	Recommendation
8mm_Spark_Plug_Wire_Separator_Holder.STL	Mount / bracket	37.8 KB STL	Slice file	Slice file	Slice file	Check the spark plug wire diameter to ensure a tight fit.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

8mm Spark Plug Wire Separator Holder

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a spark plug wire separator holder for 8mm spark plug wires. Used this on my 2007 Ford Ranger 3.0 V6. Print settings I used were.3mm layer height 75% infill with PLA+ (by ESUN) Depending on actual spark plug wire, modifications may be required. I used a lighter and bent it to make the diameter fit tight. EDIT: PLA warps slightly in the engine bay so I would use a different material like ABS.