Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

94-97 S10 and Blazer HVAC knob

0 downloads48 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Temp and mode selection knob for GM HVAC panel on the following vehicles: CHEVROLET BLAZER 1995-1997 CHEVROLET S10 PICKUP 1994-1997 GMC JIMMY 1995-1997 GMC SONOMA 1994-1997 OLDSMOBILE BRAVADA 1996-1997 These have a very small D shaft and the mode selection requires quite a bit of torque for the shaft size, so the OEM polycarbonate knobs like to crack and break regularly. These may get loose fairly quickly depending on the material you use. I will design and upload a version that will accept the metal insert, and hopefully those will last longer. The pointer features a hole to allow back-light through at night when printed with non translucent filament. I will upload a different pointer style for translucents once i get some trans filament to experiment with. This is a work in progress!