944 Turbo/S2 Fog Light Lens Project - image

Files (2)

944FogLight.stl

STL

31.4 MB

Foglight_V1.stl

STL

293.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
944FogLight.stl	Printable file	31.4 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation to minimize supports
Foglight_V1.stl	Printable file	293.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

944 Turbo/S2 Fog Light Lens Project

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is very much a work in progress and I welcome assistance and comments. I made this partly as an experiment in what the camera 3d modelling software could get us and partly because I'm cheap and don't want to spend $300+ on replacement lenses for my 944 S2. My own use for these will be to act as a replacement cover for the already hacked up fog lights that I have but I believe they could serve as protective covers for still in place glass units with the outer trim pieces removed.