98 Chevy Silverado 3500 Factory dash trim for rocker switches - image

Files (6)

98_Silverado_blank_insert.stl

STL

52.9 KB

98_Silverado_insert_for_1_rocker_switch_bottom.stl

STL

75.3 KB

98_Silverado_insert_for_1_rocker_switch_top.stl

STL

78.6 KB

98_Silverado_insert_for_2_rocker_switch.stl

STL

74.3 KB

98_Silverado_insert_for_3_rocker_switch.stl

STL

60.5 KB

98_Silverado_insert_for_rocker_switch.stl

STL

57.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

6 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
98_Silverado_blank_insert.stl	Printable file	52.9 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
98_Silverado_insert_for_1_rocker_switch_bottom.stl	Printable file	75.3 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
98_Silverado_insert_for_1_rocker_switch_top.stl	Printable file	78.6 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
98_Silverado_insert_for_2_rocker_switch.stl	Printable file	74.3 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
98_Silverado_insert_for_3_rocker_switch.stl	Printable file	60.5 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
98_Silverado_insert_for_rocker_switch.stl	Printable file	57.6 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

98 Chevy Silverado 3500 Factory dash trim for rocker switches

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

In the last few years, I wanted to install my rocker switches to be part of the factory insert look, cutting it out by hand just wasn't as good. Now that I have a 3d printer, it made it all possible and in any configuration possible.This one is where the cargo light and 4x4 switch is located, mine is a non 4x4. I printed mine a little different. I have also included a solid piece. as well as a 3 rocker switch. The dimensions are very close if not accurate, The last 2 pictures compare the genuine part verses the printed part. The Blank insert is designed by BiscuitsOnTheFloor, I got it from here https://www.thingiverse.com/thing:2202388 This is still a work in progress, as I have not yet tried to insert it in my dash yet. I will be working on another insert later on, which is the one below it. If you have any requests for a different configuration, send me a message and I will make one for you.