Files (3)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| F250_Camera_Lower_Mount.stl | Mount / bracket | 862.2 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
| F250_Camera_Nut.stl | Printable file | 889.4 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
| F250_Camera_Upper_Spacer.stl | Printable file | 31.2 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
99-04 F250 Front Camera Mount
Shared by
3DPrintedCarPartDescription
I wanted to mount a camera to the front of my 2000 F250 but the camera needed an adapter. the mount is designed to work with the NATIKA backup/Front View camera and aims the camera such that the front of the bumper is at the bottom of the screen to see just how close that tiny invisible Prius is in the grocery parking lot. I printed it out of black PETG and have had it on the truck for over 6 months through a nice hot Texas Summer with no issues.
Compatible Cars
Originally published on thingiverse.com by Thomas Campbell (tomiscampbell) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
