Ford Fiesta XR2 Towing Eye Cover - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Front Bumper

Ford Fiesta XR2 Towing Eye Cover

0 downloads48 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Work In Progress A replacement for the unobtanium Towing Eye Covers that are often missing on Mk2 Ford Fiesta XR2's. Based on lots of trial and error on my car, which unfortunately being imported from Portugal has suffered some deformation of the front skirt where the part assembles, due to the heat. It is rust free tho, so some positives there. This means it may not fit all cars, despite how well it fits mine, would be good to check. The clip pieces assemble into the holes on the main component, so you need two of those, this should help prevent it dropping away more than the original ford parts.