9th Generation Honda Accord Trunk Garnish Clip - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

9th Generation Honda Accord Trunk Garnish Clip

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Honda doesn't sell the clip nut that holds the rear Trunk Garnish trim piece on the deck lid, and essentially forces you to purchase the whole Garnish. This is a part I created that fits snugly within the trim piece and it allowed my to add my own M5 nuts onto the back (epoxied in place) and reattach the piece. The through hole can be tapped with an M5 tap to help with alignment as well.