Honda Civic 92-95 Trunk Emblem Badge Base - image

Files (3)

HondaEmblemBase63x54_v6.stl

STL

147.3 KB

HondaEmblemBase68x56_v5.stl

STL

177.6 KB

HondaEmblemBase72x60_v2.stl

STL

172.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
HondaEmblemBase63x54_v6.stl	Printable file	147.3 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.
HondaEmblemBase68x56_v5.stl	Printable file	177.6 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.
HondaEmblemBase72x60_v2.stl	Printable file	172.4 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Honda Civic 92-95 Trunk Emblem Badge Base

0 downloads47 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This are bases for flat emblems that are cheap and it can stick to the base just using the included double sided tape. I designed 3 versions for 3 different dimensions: - 63mm x 54mm (OEM size for the Civic EJ1) - 68mm x 56mm - 72mm x 60mm For fixing the base to the trunk you can use two M3 screws and nuts, I would be better if you use a auto locking nuts on the back and some washer to spread the load into the metal sheet. Also be sure to use some gasket maker around the bolts so you don't get some water getting into the trunk. The emblems can be bought on ebay, amazon or aliexpress. A link as example to buy the same emblems I used is: https://www.ebay.com/itm/284108633183 If you are on Argentina you can ask IRPRacing: https://irpracing.com.ar/producto/emblemas-exteriores-honda-civic-accord-88-00-varios-colores/