Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Keyholder-Acura_TL_Mirror.stl | Mount / bracket | 1.2 MB STL | 30g $0.72 | 33g $0.78 | 71g $1.71 | Use a drywall screw or roofing nail for mounting |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Acura TL Keyholder (carabiner clip, '03-'08)
Shared by
3DPrintedCarPartDescription
I designed this little mirror for my 2006 Acura TL keys. - Mounts on a drywall screw or roofing nail with a small pin hole to keep it from wobbling. I chopped off the head of a pin nail. - It's designed to fit a large carabiner clip as seen in the photo. If you're feeling adventurous you could scale it down to fit a small carabiner. - I printed it in the mounting position, and only used supports for the outer tip. Smaller layer heights, obviously, produce better results; I used.12mm. ~GrysbanTech.
Originally published on thingiverse.com by Joseph Grysban (GrysbanTech) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
