← Back to Browse Parts
Files (1)
Umbrella_holder_V1.STL
STL
47.3 KBPrint guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
1 model file
Recommended kit
11g
Based on 25% main infill across listed model files
Material cost
$0.26
Filament only at roughly $24/kg PETG / ASA
Print time
19m–31m
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Umbrella_holder_V1.STL | Mount / bracket | 47.3 KB STL | 10g $0.24 | 11g $0.26 | 24g $0.57 | Ensure a brim or raft is used for stability if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Organizers
Volkswagen Passat B7 Rear Seat Umbrella Holder
0 downloads90 views0 likes
Shared by
3DPrintedCarPartVerified
Description
Designed to fit in the rear seat anchors on a VW Passat and hold an umbrella or really anything else.
Compatible Cars
Published Jun 30, 2026Updated Jul 15, 2026
Originally published on thingiverse.com by Jure Podlesnik (Podlesniik) · License: CC BY
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
