VW e-Golf portable charge cord holder - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

VW e-Golf portable charge cord holder

0 downloads37 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I wanted to make a holder for my 2015 VW e-Golf's portable charge cable. I didn't want it sitting in the trunk, or sliding around. Once you bolt (or zip tie) your portable charger to this, you can hang the portable charger up on the peg in the rear of the hatch (see photo). Nice and clean! Credit for the J1772 plug portion goes to erroneus: https://www.thingiverse.com/thing:153449