Files (2)

Prolunga_x_tappo_faro_500.stl

STL

140.4 KB

Prolunga_x_tappo_faro_500_upside.stl

STL

139.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Prolunga_x_tappo_faro_500.stl	Printable file	140.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Prolunga_x_tappo_faro_500_upside.stl	Printable file	139.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Adapter fiat 500

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Extension for fiat 500S headlight closing cap. After installing new led low beam lamps (without cooling fan) it was no longer possible to install the headlight dust cap. So I made this adapter.You also need 4 metal screws L 20-25mm Ø 4.2mm and a piece of sponge gasket (such as those anti-draft windows).It is necessary to adjust the screws, insert and rotate. Prolunga per tappo di chiusura faro fiat 500S.Dopo aver installato nuove lampade anabbaglianti led (senza ventolina di raffreddamento) non era più possibile installare il tappo antipolvere del faro. Ho quindi realizzato questo adattatore.Sono necessarie anche 4 viti per metallo L 20-25mm Ø 4.2mm e un pezzo guarnizione in spugna (tipo quelle antispiffero finestre).E' necessario regolare le viti,inserire e ruotare.