Fiat 500 Abarth Euro Tail Light Panel - image

Files (4)

Overlay_Left.stl

STL

157.8 KB

Overlay_Right.stl

STL

157.8 KB

Scorpion_Left.stl

STL

159.8 KB

Scorpion_Right.stl

STL

159.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Overlay_Left.stl	Choose left variant	157.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Overlay_Right.stl	Choose right variant	157.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Scorpion_Left.stl	Choose left variant	159.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Scorpion_Right.stl	Choose right variant	159.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Fiat 500 Abarth Euro Tail Light Panel

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Converting the U.S. style Fiat 500 tail lights to the Euro version is a popular modification. The lights themselves are expensive enough, but center panels for these lights sell for around $150 which seems excessive to me. My first generation panel was a simple panel with a cutout for the Abarth Scorpion logo. I used the outline of an Abarth Scorpion logo posted by MiguelBi for the pattern. This is the version shown in the photographs. Unfortunately, it leaves some poorly supported parts of the scorpion which will no doubt warp over time. So the second generation, which are the files included here, consists of two parts. The base with the raised scorpion logo along with an overlay. The two pieces should be glued together, producing a more robust panel. Attach the panel to the tail lights with several pieces of two-sided tape. I like 3-M automotive trim tape. I printed the overlay in E-Sun warm white which is a close match for my car's body color. I printed the scorpion logo in E-Sun fire engine red because the accent details on my car are done in red. Suit yourself on what colors to use. I printed the overlay panels on a textured sheet which produced a nice surface finish.