Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| blinkerhalter.stl | Primary model | 96.3 KB STL | 12g $0.29 | 13g $0.32 | 29g $0.69 | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Adapter for turn signal for BMW vehicle
Shared by
3DPrintedCarPartDescription
An adapter that fits to actual BMW motorbike indicators. I used them to adapt modern indicators to the rear frame of an old 1983 BMW G/S. First I used the printed ones for a while, meanwhile I changed to milled ones (same shape).
Compatible Cars
Originally published on thingiverse.com by Markus Kraus (grommel) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Cap for diagnostic connector in the engine compartment. Fits BMW 2002
BMW
Headlamp adjusters for BMW E39 vehicles
BMW E39
Tail Light Bulb Holder Broken Tab Fix for 1999 BMW 3 Series E46
BMW E46 Headlight washer cap
High beam headlight cap for BMW 1 Series (F20)
BMW X5 E70 Center Console Blind Plate
BMW
