LED headlight adapter for BMW E46 - image

Files (1)

E46_Headlight_LED_Adapter.stl

STL

123.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
E46_Headlight_LED_Adapter.stl	Primary model	123.9 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

LED headlight adapter for BMW E46

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Created this adapter for my BMW E46 M3 headlights. I wanted to fit H7 LEDs but most of them come with a different connector than the one that fits on an E46. This adapter will fit to the car and the typical H7 LED connector. All you have to do is cut/dremel the 2 pins on the aftermarket H7 LED to fit the connector of the car. (See attached pictures. Cut/dremel the area marked black).Then put the LED connector in the adapter I've created and then connect the adapter to the car.