Files (1)

E46_H1_Adapter.stl

STL

61.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
E46_H1_Adapter.stl	Primary model	61.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Headlight Adapter for E46 H1

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is something I designed for the headlights on my car. I wanted to convert to xenon so I bought projector inserts whose clips didn't hold the bulbs very well. I haven't figured out how to seal them yet but they seem to hold. I printed it oriented as it is, manually supported the 'wings' as they are slightly higher than the 'pressure' face.