Files (1)

adblue-wrench_v1.0.0.stl

STL

208.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 30%	100% solid	Recommendation
adblue-wrench_v1.0.0.stl	Primary model	208.7 KB STL	Slice file	Slice file	Slice file	Ensure the wall thickness is maintained at 4mm for structural integrity.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Adblue Wrench for AUDI A6

0 downloads66 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a wrench for opening the Adblue cap of the Audi A6 (model C7). You can spin it around continuously when opening or closing. I have designed it because I did not want to use the wheel wrench which can provide too much torque and is too big to turn around continuously. If you have another car with a 17mm cap, it may fit to yours, as well. Important parameters for printing Support: No Wall Thickness: 4mm Infill Density: 30% Infill Pattern: Lines History Version 1.0.0 First design.